View LC370W01_101870.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LC370W01 Liquid Crystal Display
Product Specification
SPECIFICATION FOR APPROVAL
( ) Preliminary Specification ( ) Final Specification
Title
BUYER MODEL -
37.0" WXGA TFT LCD
SUPPLIER *MODEL SUFFIX LG.Philips LCD Co., Ltd. LC370W01 A5K1
*When you obtain standard approval, please use the above model name without suffix
APPROVED BY /
SIGNATURE DATE
APPROVED BY M.H. Park / G.Manager
SIGNATURE DATE
REVIEWED BY / J.H. Yoon / Manager
PREPARED BY / S.S. Kim / Engineer
Please return 1 copy for your confirmation with your signature and comments.
Ver. 0.1 May.25, 2004
TV Product Development Dept. LG. Philips LCD Co., Ltd
1 / 28
LC370W01 Liquid Crystal Display
Product Specification
Contents
Number
COVER CONTENTS RECORD OF REVISIONS 1 2 3 3-1 3-2 3-3 3-4 3-5 3-6 4 5 6 7 7-1 7-2 8 8-1 8-2 9 9-1 9-2 9-3 9-4 9-5 9-6 Ver. 0.1 GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS ELECTRICAL CHARACTERISTICS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR INPUT DATA REFERENCE POWER SEQUENCE OPTICAL SPECIFICATIONS MECHANICAL CHARACTERISTICS RELIABILITY INTERNATIONAL STANDARDS SAFETY EMC PACKING DESIGNATION OF LOT MARK PACKING FORM PRECAUTIONS MOUNTING PRECAUTIONS OPERATING PRECAUTIONS ELECTROSTATIC DISCHARGE CONTROL PRECAUTIONS FOR STRONG LIGHT EXPOSURE STORAGE HANDLING PRECAUTIONS FOR PROTECTION FILM May.25, 2004
ITEM
Page
1 2 3 4 5 6 6 8 12 13 14 15 17 21 24 25 25 25 26 26 26 27 27 27 28 28 28 28 2 / 28
LC370W01 Liquid Crystal Display
Product Specification
Record of Revisions
Revision No.
0.0 0.1
Revision Date
Apr.08, 2004 May.25, 2004
Page
18
Description
Preliminary Specification(First Draft) Updated the Gray scale specification.
Ver. 0.1
May.25, 2004
3 / 28
LC370W01 Liquid Crystal Display
Product Specification
1. General Description
LC370W01 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally black mode. It has a 37.02 inch diagonally measured active display area with WXGA resolution (768 vertical by 1366 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of more than 16.7M(true) colors. It has been designed to apply the 8-bit 1 port LVDS interface. It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut, high color depth and fast response time are important.
RGB
Source Driver Circuit
S1 S1366
+12.0V LVDS 5pair Option #9 CN1
G1
Gate Driver Circuit
Timing Controller
(LVDS Rx integrated)
(30pin)
TFT - LCD Panel
(1366 x RGB x 768 pixels)
G768
Power Circuit Block
+24.0V GND
Inverter (CN2,CN3, 12pin)
8CNs (High) 8CNs (High)
Back light Assembly (16CCFL)
General Features
Active Screen Size Outline Dimension Pixel Pitch Pixel Format Color Depth Luminance, White Viewing Angle (CR>10) Power Consumption Weight Display Operating Mode Surface Treatment 37.02 inches(940.3mm) diagonal 877.0/878.0mm(H) x 516.8mm(V) x 55.5mm(D) (Typ.) 0.200mm x 0.600mm x RGB 1366 horiz. by 768 vert. pixels RGB stripe arrangement 8-bit, 16.7 M colors 500 cd/m2 (Center 1 point Typ.) Viewing angle free ( R/L 176(Typ.), U/D 176(Typ.)) Total 125Watt (Typ.) (Logic=4.8W, Lamp=120W [IBL=6.0mA] ) 11,500 (Typ.) Transmissive mode, normally black Hard coating(3H), Anti-glare treatment of the front polarizer 4 / 28
Ver. 0.1
May.25, 2004
LC370W01 Liquid Crystal Display
Product Specification
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit. Table 1. ABSOLUTE MAXIMUM RATINGS
Value Min -0.3 21.6 -0.30 0.0 0 -20 10 10 Max 14.0 27.0 5.25 3.3 40 50 90 90
Parameter Power Input Voltage LCM Backlight inverter
Symbol VLCD VBL VON/OFF VBr TOP TST HOP HST
Unit VDC VDC VDC VDC %RH %RH
Remark at 25 2 C
ON/OFF Control Voltage Brightness Control Voltage Operating Temperature Storage Temperature Operating Ambient Humidity Storage Humidity
Note 1
Note : 1. Temperature and relative humidity range are shown in the figure below. Wet bulb temperature should be 39 C Max. and no condensation of water.
90% 60 60% Humidity [(%)RH] Wet Bulb Temperature [] 30 20 0 10 10% 10 20 30 40 50 60 70 80 50 40 Storage
40%
Operation
-20
0
Dry Bulb Temperature [C]
Ver. 0.1
May.25, 2004
5 / 28
LC370W01 Liquid Crystal Display
Product Specification
3. Electrical Specifications 3-1. Electrical Characteristics
It requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The other input power for the CCFL/Backlight is to power inverter. Table 2_1. ELECTRICAL CHARACTERISTICS
Value Min MODULE : Power Input Voltage Permissible Input Ripple Voltage Power Input Current Power Consumption Rush current VLCD VRP ILCD PLCD IRUSH Typ Max
Parameter
Symbol
Unit
Note
11.4 340 4.0 -
12.0 400 550 4.8 -
12.6 200 460 700 5.6 3.0
VDC mVP-P mA mA Watt A 1 2 1 3
Note : 1. The specified current and power consumption are under the VLCD=12.0V, 25 2C, fV=60Hz condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency. 2. The current is specified at the maximum current pattern. 3. The duration of rush current is about 2ms and rising time of power Input is 1ms(min.). White : 255Gray Black : 0Gray
Mosaic Pattern(8 x 6)
Ver. 0.1
May.25, 2004
6 / 28
LC370W01 Liquid Crystal Display
Product Specification
Table 2_2. ELECTRICAL CHARACTERISTICS
Parameter Inverter : Power Input Voltage Power Input Voltage Ripple Power Input Current Power Consumption Input Voltage for Control System Signals Lamp : Life Time Brightness Adjust On/Off On Off
Symbol
Value Min
22.8 -0.2 0 4.00 -0.3 5.00 0.0
Typ
24.0 5.0 120
Max
25.2 0.2 6.5 156 3.3 5.25 0.5
Unit
Note
VBL IBL PBL VBR V on V off
VDC Vp-p A W VDC VDC VDC
1
1 1 2
50,000
Hrs
3
Note : 1. Electrical characteristics are determined after the unit has been `ON' and stable for approximately 120Min at 252C and VBR = 3.3V. The specified current and power consumption are under the typical supply Input voltage, 24.0V. It is total power consumption. 2. Brightness Control.
This VBR Voltage control brightness. VBR Voltage
Function Maximum Brightness (100%) Minimum Brightness.(15~25%)
3.3V 0V
3. The life time is determined as the time at which luminance of the lamp is 50% compared to that of initial value at the typical lamp current on condition of continuous operating at 25 2C. Specified value is when lamp is aligned horizontally.
Ver. 0.1
May.25, 2004
7 / 28
LC370W01 Liquid Crystal Display
Product Specification
3-2. Interface Connections
This LCD employs two kinds of interface connection, a 30-pin connector is used for the module electronics and two 12-pin Connectors are used for the integral backlight system. 3-2-1. LCD Module - LCD Connector(CN1) : FI-X30SSL-HF (Manufactured by JAE) or Equivalent - Mating Connector : FI-X30C2L (Manufactured by JAE) or Equivalent Table 3. MODULE CONNECTOR(CN1) PIN CONFIGURATION
Pin No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Symbol
VLCD VLCD VLCD VLCD GND GND GND GND Select NC GND RARA+ GND RBRB+ GND RCRC+ GND RCLKRCLK+ GND RDRD+ GND NC NC GND NC(GND)
Description
Power Supply +12.0V Power Supply +12.0V Power Supply +12.0V Power Supply +12.0V Ground Ground Ground Ground Select LVDS Data format NC Ground LVDS Receiver Signal(-) LVDS Receiver Signal(+) Ground LVDS Receiver Signal(-) LVDS Receiver Signal(+) Ground LVDS Receiver Signal(-) LVDS Receiver Signal(+) Ground LVDS Receiver Clock Signal(-) LVDS Receiver Clock Signal(+) Ground LVDS Receiver Signal(-) LVDS Receiver Signal(+) Ground NC NC Ground LCD test
Note
1
2
Note: 1. If the pin no. 9 is Ground, Interface format is "LG", and if the pin no. 9 is Vcc(3.3V), Interface format is "DISM". See page 9 and 10. 2. The pin no. 30 is necessary for LCD test. When LVDS signals are abnormal operation more than 3-Vsync times and power 12V is supplied, `Open' or `Vcc' : LCD operate itself some test patterns.(AGP - Auto Generation Pattern) `Ground' : LCD operate itself a black pattern. (NSB - No Signal Black) LPL recommend `Ground' for NSB. 3. All GND (ground) pins should be connected together, which should be also connected to the LCD module's metal frame. 4. All VLCD (power input) pins should be connected together. 5. Input Levels of LVDS signals are based on the IEA 664 Standard.
Ver. 0.1 May.25, 2004 8 / 28
LC370W01 Liquid Crystal Display
Product Specification
Table 4. REQUIRED SIGNAL ASSIGNMENT FOR LVDS TRANSMITTER ( Pin9="L" or "Open" )
Host System 24 Bit
RED0 RED1 RED2 RED3 RED4 RED5 RED6 RED7 GREEN0 GREEN1 GREEN2 GREEN3 GREEN4 GREEN5 GREEN6 GREEN7 BLUE0 BLUE1 BLUE2 BLUE3 BLUE4 BLUE5 BLUE6 BLUE7 Hsync Vsync Data Enable CLOCK 51 52 54 55 56 3 50 2 4 6 7 11 12 14 8 10 15 19 20 22 23 24 16 18 27 28 30 31
DS90C385
or Compatible TxOUT0TxOUT0+ 48 47
FI-X30SSL-HF
12 13 100
Timing Controller
RxIN0RxIN0+
TxOUT1TxOUT1+
46 45
15 16
100
RxIN1RxIN1+
TxOUT2TxOUT2+
42 41
18 19
100
RxIN2RxIN2+
TxCLKOUTTxCLKOUT+
40 39
21 22
100
RxCLKINRxCLKIN+
TxOUT3TxOUT3+
38 37
24 25 9 30
100
RxIN3RxIN3+
LG / DISM
LCD Test
Note: 1. The LCD Module uses a 100 Ohm[] resistor between positive and negative lines of each receiver input. 2. Refer to LVDS Transmitter Data Sheet for detail descriptions. (DS90C385 or Compatible) 3. `7' means MSB and `0' means LSB at R,G,B pixel data.
GND
GND
LCD Module
Ver. 0.1
May.25, 2004
9 / 28
LC370W01 Liquid Crystal Display
Product Specification
Table 5. REQUIRED SIGNAL ASSIGNMENT FOR LVDS TRANSMITTER ( Pin9="H" )
Host System 24 Bit
RED0 RED1 RED2 RED3 RED4 RED5 RED6 RED7 GREEN0 GREEN1 GREEN2 GREEN3 GREEN4 GREEN5 GREEN6 GREEN7 BLUE0 BLUE1 BLUE2 BLUE3 BLUE4 BLUE5 BLUE6 BLUE7 Hsync Vsync Data Enable CLOCK 50 2 51 52 54 55 56 3 8 10 4 6 7 11 12 14 16 18 15 19 20 22 23 24 27 28 30 31
DS90C385
or Compatible TxOUT0TxOUT0+ 48 47
FI-X30SSL-HF
12 13 100
Timing Controller
RxIN0RxIN0+
TxOUT1TxOUT1+
46 45
15 16
100
RxIN1RxIN1+
TxOUT2TxOUT2+
42 41
18 19
100
RxIN2RxIN2+
TxCLKOUTTxCLKOUT+
40 39
21 22
100
RxCLKINRxCLKIN+
TxOUT3TxOUT3+
38 37
24 25 9 30
100
RxIN3RxIN3+ LG / DISM LCD Test
GND
Note: 1. The LCD Module uses a 100 Ohm[] resistor between positive and negative lines of each receiver input. 2. Refer to LVDS Transmitter Data Sheet for detail descriptions. (DS90C385 or Compatible) 3. `7' means MSB and `0' means LSB at R,G,B pixel data.
Vcc
LCD Module
Ver. 0.1
May.25, 2004
10 / 28
LC370W01 Liquid Crystal Display
Product Specification
3-2-2. Backlight Inverter - Inverter Connector : S12B-PH-SM3(manufactured by JST) or Equivalent - Mating Connector : PHR-12 or Equivalent Table 6. INVERTER CONNECTOR PIN CONFIGULATION Pin No 1 2 3 4 5 6 7 8 9 10 11 12 Note : 1. GND is connected to the LCD module's metal frame.
PCB
Symbol
VBL VBL VBL VBL VBL GND GND GND GND GND VBR On/Off
Description
Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V POWER GND POWER GND POWER GND POWER GND POWER GND 0V ~ 3.3V 0V ~ 5.0V
Note
1
2 3
1
2
3
10 11 12
S12B-PH-SM3-TB (JST : Japan Solderless Terminal Co.,Ltd.) 2. 0V : Minimum Brightness. 3.3V : Maximum Brightness. 3. On : 4.0 ~ 5.25V Off : -0.3 ~ 0.5V
Ver. 0.1
May.25, 2004
11 / 28
LC370W01 Liquid Crystal Display
Product Specification
3-3. Signal Timing Specifications
This is the signal timing required at the input of LVDS Transmitter. All of the interface signal timing should be satisfied with the following specifications for it's proper operation. Table 7. TIMMING TABLE Item
Period DCLK Frequency Period Hsync Frequency Width Period Vsync Frequency Width Horizontal Valid Horizontal Back Porch Horizontal Front Porch DE (Data Enable) Horizontal Blank Vertical Valid Vertical Back Porch Vertical Front Porch Vertical Blank tHP fH tWH tVP fV tWV tHV tHBP tHFP
-
Symbol
tCLK
Min
12.2 68 1416 45 8 775 47 2 1366 16 24 48 768 4 1 7
Typ
13.8 72 1528 47.4 32 790 60 5 1366 80 48 160 768 15 2 22
Max
14.7 80 1776 50 1063 63 1366 -
Unit
ns MHz tCLK
KHz
Remark
tCLK tHP Hz tHP Note 1) PAL : 47~53Hz NTSC : 57~63Hz
tCLK tHP- tHV 768 tHP tVFP tVP- tVV
tVV tVBP
Note: Hsync period and Hsync Width should be even number times of tCLK. If the value is odd number times of tCLK, display control signal can be asynchronous. In order to operate this LCD module, Hsync, Vsync, and DE(Data Enable) signals should be used. 1. : The performance of the electro-optical characteristics may be influenced by variance of the vertical refresh rate. 2. Vsync and Hsync should be keep the above specification. 3. Hsync Period, Hsync Width and Horizontal Back Porch should be any times of character number(8).
Ver. 0.1
May.25, 2004
12 / 28
LC370W01 Liquid Crystal Display
Product Specification
3-4. Signal Timing Waveforms
0.7VDD 0.3VDD
Hsync, Vsync, DE, Data
DCLK
tCLK
0.5 VDD
Valid data First data
Invalid data
Pixel 0,0
Pixel 2,0
Invalid data
Valid data Second data
Invalid data
Pixel 1,0
Pixel 3,0
Invalid data
DE(Data Enable)
tHP HSync tWH tHBP tHV tHFP
DE(Data Enable) tVP tWV VSync tVBP tVV tVFP
DE(Data Enable)
Ver. 0.1
May.25, 2004
13 / 28
LC370W01 Liquid Crystal Display
Product Specification
3-5. Color Data Reference
The brightness of each primary color(red,green,blue) is based on the 8-bit gray scale data input for the color the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. Table 8. COLOR DATA REFERENCE
Input Color Data Color RED MSB LSB MSB GREEN LSB MSB BLUE LSB
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red (255) Green (255) 0 1 0 0 0 1 1 1 Dark 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 ... 1 1 1 1 0 0 1 1 0 0 1 1 0 0 ... 0 0 Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01 01 00 00 1 1 0 0 1 1 0 0 1 1 0 0 ... 0 0 0 0 0 0 01 01 1 1 1 1 1 1 1 1 0 0 1 1 0 0 1 1 0 0 00 10 00 00 0 0 0 0 0 0 0 0 0 0 0 0 ... 1 1 0 0 1 1 0 0 1 1 0 0 00 10 00 00 0 0 0 0 0 0 0 0 0 0 0 0 ... 1 1 1 1 1 1 0 1 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 00 10 01 00 01 10 11 11 00 10 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 10 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 00 00 10 01 11 01 10 11 00 00 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0
Basic Color
Blue (255) Cyan Magenta Yellow White RED (000) RED (001)
RED
... RED (254) RED (255)
GREEN (000) Dark 0 GREEN (001) 0
GREEN
... GREEN (254) GREEN (255) BLUE (000) BLUE (001)
BLUE
... BLUE (254) BLUE (255)
Ver. 0.1
May.25, 2004
14 / 28
LC370W01 Liquid Crystal Display
Product Specification
3-6. Power Sequence
90%
90% 10%
Power Supply For LCD VLCD
0V
10%
T1 T2
T5 T6
T7
Interface Signal (Tx)
10%
Valid Data
10%
T3
T4
Lamp ON Power for Lamp
Table 9. POWER SEQUENCE
Parameter T1 T2 T3 T4 T5 T6 T7 Value Min 0.5 0.5 200 200 0.5 2.0 Typ Max 10 50 50 100 Unit ms ms ms ms ms ms s
Note :
1. Please avoid floating state of interface signal at invalid period. 2. When the interface signal is invalid, be sure to pull down the power supply VLCD to 0V.
Ver. 0.1
May.25, 2004
15 / 28
LC370W01 Liquid Crystal Display
Product Specification
3-6-2. Power Sequence for Inverter
24V (typ.)
Power Supply For Inverter VBL
0V
90% 0.7V
10%
T1 T2
T3
T2
Inverter Enable (On/Off)
T4 VBr
T4
3-6-3. Deep condition for Inverter
T6 VBL VBL(Min) x 0.8
0V Table 10. POWER SEQUENCE FOR INVERTER
Parameter T1 T2 T3 T4 T5 Value Min 20 500 200 0 Typ Max 10 Unit ms ms ms ms ms
Remark
inverters connected condition
VBL(Min) x 0.8
Ver. 0.1
May.25, 2004
16 / 28
LC370W01 Liquid Crystal Display
Product Specification
4. Optical Specification
Optical characteristics are determined after the unit has been `ON' for 30min in a dark environment at 252C. The values specified are at an approximate distance 50cm from the LCD surface at a viewing angle of and equal to 0 . It is presented additional information concerning the measurement equipment and method in FIG. 1. Optical Stage(x,y) LCD Module Pritchard 880 or equivalent
50cm FIG. 1 Optical Characteristic Measurement Equipment and Method Table 11. OPTICAL CHARACTERISTICS
Parameter Contrast Ratio Surface Luminance, white Luminance Variation Response Time Rise Time Decay Time RED GREEN Color Coordinates [CIE1931] BLUE WHITE Viewing Angle (CR>10) x axis, right(=0) x axis, left (=180) y axis, up (=90) y axis, down (=270) Gray Scale r l u d 85 85 85 85 88 88 88 88 6 degree 5 Symbol CR LWH WHITE TrR TrD Rx Ry Gx Gy Bx By Wx Wy Typ -0.03 5P 8 8 0.640 0.341 0.287 0.610 0.146 0.069 0.285 0.293 Typ +0.03 Ta= 252C, VLCD=12.0V, fV=60Hz, Dclk=72MHz, VBR =3.3V Value Min 350 400 Typ 500 500 1.3 12 13 ms cd/m2 Max Unit Note 1 2 3 4
Ver. 0.1
May.25, 2004
17 / 28
LC370W01 Liquid Crystal Display
Product Specification
Notes 1. Contrast Ratio(CR) is defined mathematically as : Contrast Ratio = Surface Luminance with all white pixels
Surface Luminance with all black pixels It is measured at the center point(1). 2. Surface luminance is luminance value at the center point across the LCD surface 50cm from the surface with all pixels displaying white. For more information, see FIG 2. 3. The variation in surface luminance , WHITE is defined as : WHITE(5P) = Maximum(Lon1,Lon2, Lon3, ...... , Lon5) / Minimum(Lon1,Lon2, Lon3, ..... , Lon5) Where Lon1 to Lon5 are the luminance with all pixels displaying white at 5 locations . For more information, see FIG 2. 4. Response time is the time required for the display to transition from black to white (Rise Time, TrR) and from white to black (Decay Time, TrD). For additional information, see FIG 3. 5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information, see FIG 4. 6. Gray scale specification Gamma Value is approximately 2.2. For more information, see Table 12. Table 12. GRAY SCALE SPECIFICATION Gray Level
L0 L15 L31 L47 L63 L79 L95 L111 L127 L143 L159 L175 L191 L207 L223 L239 L255
Luminance [%] (Typ)
0.20 0.31 1.02 2.57 5.15 8.64 13.0 18.1 23.4 30.0 38.0 46.7 56.3 66.8 77.9 90.8 100
Ver. 0.1
May.25, 2004
18 / 28
LC370W01 Liquid Crystal Display
Product Specification
Measuring point for surface luminance & measuring point for luminance variation
H A

B V
A : H / 4 mm B : V / 4 mm
H : 819.6 mm V : 469.8 mm
@ H,V : Active Area
FIG. 2 Measure Point for Luminance
The response time is defined as the following figure and shall be measured by switching the input signal for Black to White and White to Black.
TrR 100 90 Optical Response
TrD
10 0 Black White FIG. 3 Response Time Black
Ver. 0.1
May.25, 2004
19 / 28
LC370W01 Liquid Crystal Display
Product Specification
Dimension of viewing angle range
Normal
E
Y
= 90 , Up
= 180 , Left

= 0 , Right
= 270 , Down
FIG. 4 Viewing angle
Ver. 0.1
May.25, 2004
20 / 28
LC370W01 Liquid Crystal Display
Product Specification
5. Mechanical Characteristics
The following items provide general mechanical characteristics. In addition the figures in the next page are detailed mechanical drawing of the LCD module. Table 13. MECHANICAL CHARACTERISTICS
Horizontal Outline Dimension Vertical Depth Horizontal Bezel Area Vertical Horizontal Active Display Area Vertical Weight Surface Treatment 11,500 (Typ.)/12,000(Max) Hard coating(3H) Anti-glare treatment of the front polarizer 460.8mm 469.8mm 819.6mm 877.0 mm / 878.0mm(Inverter) 516.8 mm 55.5 mm 826.6mm
Note : Please refer to a mechanic drawing in terms of tolerance at the next page.
Ver. 0.1
May.25, 2004
21 / 28
LC370W01 Liquid Crystal Display
Product Specification

Ver. 0.1
May.25, 2004
22 / 28
LC370W01 Liquid Crystal Display
Product Specification

Ver. 0.1
May.25, 2004
23 / 28
LC370W01 Liquid Crystal Display
Product Specification
6. Reliability
Table 14. ENVIRONMENT TEST CONDITION
No. 1 2 3 4 Test Item High temperature storage test Low temperature storage test High temperature operation test Low temperature operation test Ta= 50C 240h Ta= -20C 240h Ta= 40C 50%RH Ta= 0C 240h 240h Condition
5
Vibration test (non-operating)
Wave form : random Vibration level : 1.0G RMS Bandwidth : 10-500Hz Duration : X,Y,Z, 10 min One time each direction Shock level : 100G Waveform : half sine wave, 2ms Direction : X, Y, Z One time each direction Ta= 40 C, 90%RH 0 - 14,000 feet(4267.2m) 0 - 40,000 feet(12192m)
6
Shock test (non-operating)
7
Humidity condition Operation Altitude operating storage / shipment
8
Ver. 0.1
May.25, 2004
24 / 28
LC370W01 Liquid Crystal Display
Product Specification
7. International standards 7-1. Safety
a) UL 60950, Third Edition, Underwriters Laboratories, Inc., Dated Dec. 11, 2000. Standard for Safety of Information Technology Equipment, Including Electrical Business Equipment. b) CAN/CSA C22.2, No. 60950, Third Edition, Canadian Standards Association, Dec. 1, 2000. Standard for Safety of Information Technology Equipment, Including Electrical Business Equipment. c) EN 60950 : 2000, Third Edition IEC 60950 : 1999, Third Edition European Committee for Electrotechnical Standardization(CENELEC) EUROPEAN STANDARD for Safety of Information Technology Equipment Including Electrical Business Equipment.
7-2. EMC
a) ANSI C63.4 "Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electrical Equipment in the Range of 9kHZ to 40GHz. "American National Standards Institute(ANSI), 1992 b) C.I.S.P.R "Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment." International Special Committee on Radio Interference. c) EN 55022 "Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment." European Committee for Electrotechnical Standardization.(CENELEC), 1998 ( Including A1: 2000 )
Ver. 0.1
May.25, 2004
25 / 28
LC370W01 Liquid Crystal Display
Product Specification
8. Packing 8-1. Designation of Lot Mark
a) Lot Mark A B C D E F G H I J K L M
A,B,C : SIZE(INCH) D : YEAR F : PANEL CODE H : ASSEMBLY CODE Note 1. YEAR
Year Mark 97 7 98 8 99 9 2000 0
E : MONTH G : FACTORY CODE I,J,K,L,M : SERIAL NO.
2001 1
2002 2
2003 3
2004 4
2005 5
2006 6
2007 7
2. MONTH
Month Mark Jan 1 Feb 2 Mar 4 Apr 4 May 5 Jun 6 Jul 7 Aug 8 Sep 9 Oct A Nov B Dec C
3. PANEL CODE
Panel Code Mark P1 Factory 1 P2 Factory 2 P3 Factory 3 P4 Factory 4 P5 Factory 5 Hydis Panel H
4. FACTORY CODE
Factory Code Mark LPL Gumi K LPL Nanjing C Hee Sung D
5. SERIAL NO.
Year Mark 1 ~ 99999 00001 ~ 99999 100000 ~ A0001 ~ A9999, ..... , Z9999
b) Location of Lot Mark Serial NO. is printed on the label. The label is attached to the backside of the LCD module. This is subject to change without prior notice.
8-2. Packing Form
a) Package quantity in one box : 3 pcs b) Box Size : 1040mm X 442mm X 645mm
Ver. 0.1 May.25, 2004 26 / 28
LC370W01 Liquid Crystal Display
Product Specification
9. Precautions
Please pay attention to the followings when you use this TFT LCD module.
9-1. Mounting Precautions
(1) You must mount a module using holes arranged in four corners or four sides. (2) You should consider the mounting structure so that uneven force (ex. Twisted stress) is not applied to the module. And the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer. Transparent protective plate should have sufficient strength in order to the resist external force. (4) You should adopt radiation structure to satisfy the temperature specification. (5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the surface of polarizer for bare hand or greasy cloth.(Some cosmetics are detrimental to the polarizer.) (7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzine. Normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. Do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes deformations and color fading. (9) Do not open the case because inside circuits do not have sufficient strength.
9-2. Operating Precautions
(1) The spike noise causes the mis-operation of circuits. It should be lower than following voltage : V=200mV(Over and under shoot voltage) (2) Response time depends on the temperature.(In lower temperature, it becomes longer.) (3) Brightness depends on the temperature. (In lower temperature, it becomes lower.) And in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur. (5) When fixed patterns are displayed for a long time, remnant image is likely to occur. (6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be done by system manufacturers. Grounding and shielding methods may be important to minimized the interference. (7) Please do not give any mechanical and/or acoustical impact to LCM. Otherwise, LCM can't be operated its full characteristics perfectly. (8) A screw which is fastened up the steels should be a machine screw. (if not, it causes metallic foreign material and deal LCM a fatal blow) (9) Please do not set LCD on its edge.
Ver. 0.1 May.25, 2004 27 / 28
LC370W01 Liquid Crystal Display
Product Specification
9-3. Electrostatic Discharge Control
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground through wrist band etc. And don't touch interface pin directly.
9-4. Precautions for Strong Light Exposure
Strong light exposure causes degradation of polarizer and color filter.
9-5. Storage
When storing modules as spares for a long time, the following precautions are necessary. (1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5C and 35C at normal humidity. (2) The polarizer surface should not come in contact with any other object. It is recommended that they be stored in the container in which they were shipped.
9-6. Handling Precautions for Protection Film
(1) The protection film is attached to the bezel with a small masking tape. When the protection film is peeled off, static electricity is generated between the film and polarizer. This should be peeled off slowly and carefully by people who are electrically grounded and with well ionblown equipment or in such a condition, etc. (2) When the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) You can remove the glue easily. When the glue remains on the bezel surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normalhexane.
Ver. 0.1
May.25, 2004
28 / 28

▲Up To Search▲

Price & Availability of LC370W01

	To Download LC370W01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .